Sensors to Detect Industrial Leaks for Liquids and Gasses

Industrial Leak Detection

Sensors to Detect Industrial Leaks for Liquids and Gasses

The Serverscheck offers one of the widest ranges in liquid gas detection technology specifically designed to provide a highly sensitive and reliable solution for monitoring sudden leakage in liquid or gas state using sensing cables or gas sensors. Such leaks have the potential to lead to unexpected disasters and damage.

  • SNMP, JSON, XML & Modbus TCP ready
  • Email & SMS alerting
  • Plug and play
  • Affordable
  • Simple

Liquid Leak Sensing Cables

Industrial grade leak sensing cables for numerous types of liquids: water, fuel and acids.

When a liquid comes into contact at any point along the sensing cable, then an alert will be triggered.

Max leak detection length per sensor is 100m or 300ft.A base unit can host up to 8 leak sensors covering a total cable length of up 800m / 1600ft.

Water Spot Sensor

This SERVERSCHECK Water Spot Sensor is used in applications where you want to detect floods. Whenever water fully covers the 2 rods, the sensor is triggered. It is typically used in applications to monitor if water has reached a certain level.

For critical areas where no water is allowed water leak sensor is what you need. This sensor will trigger an alert whenever water makes contact with the cable, even a small amount.

Industrial Water Leak Location Sensor

This Industrial Water Leak Location Sensor is an industrial-grade solution, ideal for detecting leaks and pinpoint the location along the cable, suitable in large areas such as data centers, commercial buildings, warehouses, server rooms, gas tanks, UPS, outdoor cabinets, power rooms, and any other critical facility or infrastructure.

  • Detects leaks along its cable with an accuracy of up to 15cm (6 inch)
  • Detects multiple leaks at the same time, with location for up to 2 sequential leaks
  • Triggers an alert when water touches cable
  • 5m/17ft reusable water sensitive cable

Fuel Leak Detection Sensor

This Fuel Leak Detection Sensor is designed to monitor for hydrocarbon leaks like oil & fuel in critical infrastructure facilities. It integrates via Modbus TCP, SNMP, XM, JSON with 3rd party systems.

  • Plugs into the base unit (BASE-WIRED)
  • Powered by the base unit (BASE-WIRED)
  • Leak Detecting Sensing cable is made in the USA
  • Alerts via SNMP Traps, email, SMS or voice calls
  • Expandable up to 30m/100ft per sensor
  • Sensing cables are approved for installation in ordinary and hazardous areas

Gas Sensors

These gas sensors are digital sensors that sense the quantity of the specific gas in the air. These multi-gas sensor can be configured to detect up to 4 different types of gasses. With over 22 gas types, more than 7,000 combinations are possible to virtually monitor anything.

Hydrogen (H2) Gas Sensor

This Fuel Leak Detection Sensor is designed to monitor for hydrocarbon leaks like oil & fuel in critical infrastructure facilities. It integrates via Modbus TCP, SNMP, XM, JSON with 3rd party systems.

  • Measures hydrogen in the air between 0 to 100% LEL
  • Lab calibrated against 50% reference gas
  • Proven sensor component made in Japan
  • Sensors for 21 other gas types like CO, CH4, HF, NH3
  • Compact plug & play sensor

Indoor Air Quality (IAQ) Sensor

This Indoor Air Quality (IAQ) Sensor measures the volatile organic compounds in the air surrounding the sensor. Those measurements enable you to monitor the air quality inside your buildings, data centers, server rooms, healthcare facilities and other critical facilities.

  • plugs into the base unit (BASE-WIRED)
  • powered by the base unit (BASE-WIRED)
  • compact plug & play sensor
  • designed for indoor use
  • Measures CO2 levels in ppm equivalents

Digital Gas Sensor

This Digital Gas Sensors is designed for detecting the presence and level of specific gas concentrations in critical facilities.

A sensor is assembled and programmed to detect one of the 21 different gas types: C2H4, CH2O, CH3SH, CH4, CL2, CLO2, CO, CO2, ETO, H2, H2S, HCL, HCN, HF, NH3, NO, NO2, O2, O3, PH3, SO2, R134a

  • Measures gas in particles per million (ppm)
  • Compact plug & play sensor
  • Alerts via SNMP Traps, email or SMS
  • Wired or optionally wireless
  • Integrates over IP using Modbus TCP, SNMP, XML, JSON

Keep your organization safe from industrial leaks for liquids and gasses.

If you'd like more information contact us on 1800 268 378.

Item added to cart.
0 items - $0.00
CoverTel Telecommunications Group
Shopping cart
There are no products in the cart!
Continue shopping
0