Keysight Technologies 33250A Function Arbitrary Waveform Generator
$12,902.00 incl GST
The Function Arbitrary Waveform Generator Keysight Technologies 33250A provides 10 standard waveforms with sine and square to 80MHz, Arbitrary waveforms with 12-bit resolution and 200MSa/s, and THD less than 0.04%.
The Function Arbitrary Waveform Generator Keysight Technologies 33250A uses direct digital-synthesis techniques to create a stable, accurate output on all waveforms, down to 1 µHz frequency resolution. The benefits are apparent in every signal you produce, from the sine wave frequency accuracy to the fast rise/fall times of square waves, to the ramp linearity.
The front-panel operation of the 33250A is straightforward and user-friendly. The knob or a numeric keypad can be used to adjust frequency, amplitude, and offset. You can even enter voltage values directly in Vpp, Vrms, dBm, or high/low levels. Timing parameters can be entered in hertz (Hz) or seconds.
Why settle for a basic function generator when you can get arbitrary waveforms at no extra cost? With the 33250A, you can generate arbitrary waveforms with a 12-bit vertical resolution, 64K memory depth, and a sample rate of 200 MSa/s. You can also store up to four 64K-deep arbitrary waveforms in non-volatile memory with user-defined names to help you find the right waveform when you need it most.
Sine, square, pulse, ramp, noise, sin(x)/x, exponential rise, exponential fall, cardiac, and DC volts.
- Sine to 80MHz
- Square to 80MHz
- Pulse to 50MHz
- Arb to 25MHz 12bit, 200MS/s, 64k-point memory depth
- Ramp to 1MHz12bit, 200MS/s, 64k-point memory depth
- White Noise 50MHz
The 33250A can generate simple pulses up to 50 MHz. With variable edge time, pulse width, and voltage level, the 33250A is ideally suited to a wide variety of pulse applications.
AM, FM, and FSK capabilities make it easy to modulate waveforms with or without a separate source. Linear or logarithmic sweeps can be performed with a programmable frequency marker signal. Programmable burst count and gating allow you to further customize your signal. For system applications, both GPIB and RS-232 interfaces are standard and support full programmability using SCPI commands.
The unique design of the 33250A combines a low-profile instrument with the benefits of a color graphical display. Now you can display multiple waveform parameters at the same time. The graphical interface also allows you to modify arbitrary waveforms quickly and easily.
The 33250A TCXO timebase gives you the frequency accuracy of 2 ppm for your most demanding applications. The external clock reference input/output lets you synchronize to an external 10 MHz clock, to another 33250A, or another Keysight 332XXA function/ arbitrary waveform generator. Phase adjustments can be made from the front panel or via a computer interface, allowing precise phase calibration and adjustment.
You may also like…
Rohde & Schwarz SMBV100A Vector Signal Generator
$47,140.00incl GST Select options
Keysight Technologies E8257D
PSG Series Analog Signal Generator-540/7/1EH/MOD3/UNX
$232,759.00incl GST Select options
Rohde & Schwarz FSW43 Signal and Spectrum Analyzer
FSW Signal and Spectrum Analyzer
$525,361.00incl GST Select options
Keysight Technologies N5182B
Vector Signal Generator
$283,689.00incl GST Select options